|
|
   
|
| |
|
Adobe PDF Downloadable Version of Article
|
|
|
|
Loading w/Clip
|
|
|
| |
|
|
| Place rifle with muzzle pointing in safe direction. |
|
|
| Open bolt and pull to rear of receiver. Place clip into guide in top of Mauser receiver. |
|
|
| Push down on clip into grooves as shown in Loading 3. |
|
|
| Once clip is inserted into receiver, push down on rounds until they strip off of clip and are loaded into the magazine as shown in Loading 4. |
|
|
| Loading 5 shows what the magazine looks like loaded with stripper clip still inserted. |
|
|
| Pull stripper clip out of receiver as shown in Loading 6 . Close bolt (this action chambers first round into the chamber) and engage safety. |
|
Loading Single Rounds
|
|
|
| |
|
|
|
Place rifle with muzzle pointing in safe direction.
Open bolt and pull to rear of receiver.
|
|
|
| Insert 5 or less rounds into magazine as shown in Loading Single Rounds - Loading 2 . Close bolt (this action chambers first round into the chamber) and engage safety. |
|
Unloading
|
|
|
| Place the rifle's safety on. Turn rifle over. Take a round or other blunt tool and insert it into the magazine release catch as shown in Unloading 1 . |
|
|
| Release magazine door as shown in Unloading 2. |
|
|
| Allow all rounds in magazine to fall away from magazine. |
|
Safety Operations
|
|
|
| Safety 1 shows the Mauser safety in the off position. |
|
|
| Safety 2 shows the Mauser in the middle position. This position allows for the opening of the bolt - but does not allow for the trigger to be pulled. |
|
|
| Safety 3 shows the Mauser in the far right - "Safety On" position. This position does not allow you to open the bolt or pull the trigger. |
| |
|
Adobe PDF Downloadable Version of Article
|
| |
