Click on any of the images below to see a larger version of the image.
# Part Description
1 Bolt
2 Hand Guard
3 Rear Guard Screw
4 Front Guard Screw
5 Lower Band Screw
6 Upper Band Screw
7 Stock
8 Receiver
9 Trigger Guard
10 Lower Band
11 Upper Band
12 Rear Sight
13 Barrel
14 Front Sight
 
Disassembly Instructions
Click here to see larger image! 1) Make sure the rifle is pointed in a safe direction and is unloaded.

Press the trigger forward.
Click here to see larger image! 2) Remove the bolt and set aside.
Click here to see larger image! 3) Loosen the screw from the upper band as shown in figure 3.
Click here to see larger image! 4) Remove the upper band screw.
Click here to see larger image! 5) Slide the upper band forward.
Click here to see larger image! 6) Loosen lower band screw.
Click here to see larger image! 7) Remove lower band screw.
Click here to see larger image! 8) Loosen (only - do not remove) the lower band swivel screw.
Click here to see larger image! 9) Slide lower band forward.
Click here to see larger image! 10) Slide the handguard forward.
Click here to see larger image! 11) Remove the handguard and set aside.
Click here to see larger image! 12) Unscrew the trigger guard rear screw.
13) Remove the trigger guard rear screw.
14) Unscrew the trigger guard front screw.
Click here to see larger image! 15) Remove the trigger guard front screw.
Click here to see larger image! 16) Remove the trigger guard and set aside.
Click here to see larger image! 17) Remove the barrel and receiver assembly from the stock. 
Click here to see larger image! 18) Figure 18 shows the disassembled carbine.
Reassembly Instructions
Click here to see larger image! 19) Place barrel and receiver assembly back into the rifle stock.
Click here to see larger image! 20)  Replace trigger guard.

 
Click here to see larger image! 21)  Install the  trigger guard front screw.

 
Click here to see larger image! 22) Install the trigger guard rear screw.

 
Click here to see larger image! 23)  Tighten trigger guard front screw.
Click here to see larger image! 24) Tighten trigger guard rear screw.
Click here to see larger image! 25) Slide the handguard to the rear (as shown in figure 29).
Click here to see larger image! 26) Slide the lower band back into place.
Click here to see larger image! 27) Insert the lower band screw.

 
Click here to see larger image! 28)  Tighten the lower band screw.
Click here to see larger image! 29) Tighten the lower band swivel screw.
Click here to see larger image! 30) Slide the upper band back into place. Make sure bayonet lug is on bottom.
Click here to see larger image! 31) Return the upper band screw.
Click here to see larger image! 32) Tighten the upper band screw.
Click here to see larger image! 33) Reinsert bolt to receiver.
Click here to see larger image! 34) Push bolt forward and lock into closed position. Carbine is now reassembled.

Copyright 2003, 2004, 2005, 2006, and 2007 © TENNESSEE GUN PARTS